Eibach Kit Pro Springs Mini Cabriolet R52 2004-2007 One/cooper/cooper S

This product sheet has been automatically translated. If you have any questions, please contact us.

Eibach kit pro suspension springs performing for. Performance springs eibach pro-kit for.

For manufacturer and model: for manufacturer and model: mini convertible (r52) convertible years 07.2004-11.2007. Load to the axle in front/back kg: max. Load in front/back kg: 890/800.

Descent in mm forward/back about. Engine types: engine types: one/cooper/cooper. Certificate / abe: certificate / abe: with certificate of parts subject to registration! Mm cardboard box: mm cardboard packaging: 636x377x170. Weight in net/gross kg: weight in net kg / wide: 6,480 / 6,980.

Notes: please read the yellow chart below! Tips: please read the yellow table below! Eibach pro-kit high-performance suspension springs our best seller par excellence. The first choice of motorsport fans from all over the world.

Optimal handling lowering the center of gravity up to 40 mm features of the progressive suspension quality of optimal driving component of the pro-kit eibach b12. Eibach pro-kit performance springs - 1 choice of automotive enthusiasts in the world! Ultra-performing lower centre of gravity handling - lowers the vehicle up to 1.5 (40 mm) progressive spring design excellent driving quality is part of the eibach b12 pro kit.

How do I check if this item is correct for my vehicle? Three simple steps that you can check yourself using your registration certificate and vehicle registration document. An example of a new registration certificate can be found as an example of an image added to the description of the article above. With the four hsn (mpn) and 3 digits tsn (type the code number, the first 3 characters) you can check which items in our shop match your vehicle and suit you. See entry above in the list of vehicles!

You will find these numbers under 2.1 and 2.2 in your registration certificate part i (vehicle registration), in our red photo above highlighted. Please check the axle loads at the front and back and compare them with our description. In your registration certificate (vehicle registration), these are listed under 7.1 and 7.2 listed.

(you can find it in the example of the \"vehicle registration\" image above blue marked). In the end, this remains year of construction and the notes to check, the year of construction must be in the time window specified by us years of construction you will find this information in our data table at the top of the line \"for manufacturer and model\" and the associated information in the important yellow information table below. If different or unsure, please ask our qualified service team! Note table: Please refer to the product description above for relevant information. German: if not specified separately, the reduction specified in the catalog is reduced by the amount of factory lowering for vehicles equipped with a sport suspension factory departure. If not listed separately, vehicles equipped with a superior chassis starting factory (e.

, all-terrain character, crossover or rough roads) are excluded from the use of our products. For the item/vehicle assignment, the information of the coin certificate or the abe is decisive. To this end, the receipt number by type point k on the vehicle registration certificate or on the vehicle's nameplate!

Must be compared to the information contained in the report. Before installation, please check with a parts certificate/abe to see if the items delivered (see parts identification) are approved for your vehicle (see area of application). In case of discrepancies, the parts should not be installed - in this case, please contact the seller.

We recommend that our products be installed only in a qualified workshop with the appropriate qualified staff and special tools required. You can \"read\" the installation position from the print - have the spring installed to be able to read the print.

The number should not be upside down. Once the spring/chassis components are installed, it is imperative to check the wheel settings. If the standard shock absorbers are no longer fully functional and have significantly weakened their effect, we strongly recommend that you replace them with new standard shock absorbers or sports shock absorbers. The decline in performance is negatively affected by worn or defective shock absorbers.

If you need new shock absorbers, we'll be happy to advise you. With sportline springs, we recommend the installation of sports shock absorbers such as bilstein b8. All wheel/tire combinations that have been approved by wheel type inspection centres can be used.

Conditions in the wheel ratio or abe wheels must be met, with the exception of the requirement of a standard chassis. Depending on the engine, transmission, equipment and vehicle tolerances, the lowering may deviate a few mm from the specified values. The amount of the reduction is always reduced by the amount of a plant cut.

The usability of our products is about vehicles left in series. For conversions and special accessories also applies to standard accessories! Such as the installation of a special braking system (e., ceramic braking system), central locking of wheels, sport suspension, gpl system, etc.

Our products may not be usable. The dimensions shown refer to new vehicles released in series. Measuring points: vertical distance between the centre of the wheel hub and the lower edge of the wing.

Basically, the specified dimensions are target values, which can vary depending on the vehicle. If the standard suspension has electronic control of the shock absorber, its functionality is not available when using b12 or pro street s suspensions. A licensed workshop can disable the error message displayed on the on-board computer. If it is available for your vehicle, we recommend using pro-tronic to remove the error message.

Factory-installed spring plates are available in 8-23 mm thickness in specialized db workshops. This allows the reduction specified here to vary.

With 205/50/15 tires and rims 7 j x 15 - recommendation: installation of identical sports gas shocks. If necessary, please request a source from our headquarters. Not usable with factory lowering. The special equipment considered here includes the following points system: air conditioning automatic transmission 7 points 4 - 5 cyl.

Automatic box 4 points 6 cyl. 2 additional heating points 3 sunroof points 2 points of abs 2 points of airbag 1 point of headlight cleaning system 1 engine protection point 1 seat electronic adjustment point 2 points of the combination of additional equipment over 4 additional points , the lowering kit must be used for vehicles equipped with special equipment. The choice of rubber skates results from the following values: up to 7 points included 8 mm (1 nub) up to 13 points including 13 mm (2 nubs) up to 21 points included 23 mm (4 nubs) over 21 points the downhill kit is not suitable for this version. Except vehicles with level control.

6-cylinder vehicles must be converted into sport shock absorbers. Except vehicles with all-wheel drive / 4x4. Except vehicles with electronically controlled shock absorber force adjustment. For a lowering of more than 40 mm and a diameter of the right drive shaft greater than 42 mm, eventl.

The serial stabilizer can be replaced. The set of stabilizers required here is available under the eibach reference. E40-85-005-01-10 available in well-stocked specialty stores. Except for the special \"sportiv\" and \"sport\" models (vehicles with bilstein shock absorber). The suspension-dependent braking pressure controller on the rear axle must be controlled to the specifications of the workshop manual and, if necessary, reset.

The ha shock absorbers must be replaced by the shock absorbers provided. On vehicles with combined fog lights and position lights, check to see if the lower edge of the projector is less than 350 mm above the ground. If this is the case, additional position lights must be installed above this dimension. The standard position lights must then be deactivated by removing the bulb and disconnecting the cable connection. Not suitable for the \"cross\" model variant. Only for vehicles with the following properties: goes: steel spring, ha: level control. Not suitable for the 2009 colt rallyart version. Check: This kit is suitable for: 10. Figure - letter a, b.... Increased axle load for trailer operation (see parts certificate). If there is an individual operating licence, an acceptance in accordance with the stvzo is required. Not suitable for version 1.6 racing (ds3). If necessary, please contact us after the purchase.

Not for the \"caddy maxi\" version. Also for the \"lpg\" version (gas system). Only for vehicles with pasm (electronic shock control). For vehicles with multi-arm rear axle (independent wheel suspension). For vehicles with rear axle with twisting beam (rigid axle).

M1g vehicles (all-terrain vehicles) must be rewritten as m1 vehicles (private cars). For vehicles without amg chassis. For vehicles with amg chassis.

Not for the \"sti\" version. It may be necessary to replace the spring plates. With the e8530-140 kit, the existing spring plate may need to be exchanged for the original spring hold no: 1ho412341.

For the e8547-140 and e8550-140 sets, the existing spring plate may require a replaced with the original spring plate no. Only for vehicles without air suspension. For export only, not available in Germany. Only without a certificate of coins! For version with long wheelbase.

Not for \"nurburgring-edition\" (211 ps). Not for the \"trailhawk\" version. For manual transmission petrol engines. For automatic petrol engines and diesel vehicles.

For vehicles without abc (active body control). Only for vehicles with standard s-line chassis. Only for vehicles without standard s-line chassis. Only for vehicles without sport suspension plus without drc - dynamic ride control. Only for vehicles with sport suspension plus with drc - dynamic ride control.

Not for the \"tiguan allspace\" version. Only for vehicles with range extenders. Not for the \"crosscountry\" version. Not for the plug-in hybrid version. Service information: Please refer to the product description above for applicable instructions. English: if not named separately, for vehicles with lowered suspension oe, the lowering dimension is reduced by the lowering dimension carried out by the manufacturer. If not named separately, vehicles with original lift suspension (e.

Off-road group, crossover) are excluded from the use of our products. The specifications indicated in the certification relate to the classification of the item/vehicle. Please check your car's registration number and compare with the registration. Letter k in your vehicle registration certificate or to be found on the nameplate of your car!

Mounting - we recommend settling our spring system by a qualified workshop only, which has qualified staff and special tools required. Mounting position - you can read the mounting position of the springs from the print - have them installed exactly as you read the print. Adjustment of the wheels - once the installation of the spring/suspension is complete, it is necessary to check the adjustment of the wheels. Shock absorbers - if standard shock absorbers are no longer fully operational and their efficiency has decreased significantly, we strongly recommend replacing them with new standard shock absorbers or sports shock absorbers. The performance of the new lowering suspension will be of no optimal result using old, solid or broken shock absorbers. If you need new shock absorbers, we can help if necessary. The installation of sport-shock absobers is recommended. As an example bilstein b8 here, all wheel/tire combinations are possible, which are published by the institution controlling the type of wheel.

The instructions for the approval of the wheels must be respected, except for: an original suspension is required. Depending on the engine, gearbox/transmission, the decrease in equipment and vehicle tolerances may differ from the stated values. The lowering dimension is reduced by the lowering size achieved by the manufacturer. The applicability of our products is for standard cars.

In all cases of reconstruction (even with original accessory parts), such as the installation of an accessory braking system (e. Ceramic brakes), a sports suspension, a lpg system (liquefied petroleum gas) for example, the use of our products may be excluded.

The measurements shown refer to new standard cars. Measuring points: vertical distance between the middle of the wheel hub and the lower edge of the mud wing. Generally, the measurements shown are nominal values, which can vary depending on each car.

If your vehicle is equipped with a serial electronic control of the shock absorber, it will no longer be available when using the b12 or pro-street-s suspension kit. You'll see an anomaly code. This can be reprogrammed by an official garage/dealer. If it is available for your vehicle, we recommend using pro-tronic to avoid the breakdown code. The spring plates installed by the manufacturer are available in specialized db workshops in sizes 8-23 mm.

This allows the lowering shown here to vary. For pneumatic equipment 205/50/15 and rim 7j x 15.

Recommendation: installation of sports gas pressure shocks of similar construction. The room number is only available from our special distributor. Please ask for availability and price. For vehicles, not lowered by the manufacturer.

The special equipment mentioned below contains the following points system: air conditioning 7 points automatic transmission 4 - 5 cyl. 2 independent heating points of the car 3 points sunroof 2 points abs 2 points airbag 1 point headlight cleaning system 1 point engine protection plate 1 point electronic adjustment of the seat 2 points if the result is more than 4 points, you have to choose up to 7 points 8 mm (rubber plate 1 point) up to 13 points 13 mm (rubber plate 2 points) up to 21 points 23 mm (rubber plate 4 points) more than 21 points the lowering kit is not possible for this version. 6-cylinder vehicles require modification with sport shock absorbers. Except for electronic suspension systems.

When the car is lowered by more than 40 mm in combination with a transmission shaft diameter greater than 42 mm, the original equipped front stabilizer bar must be replaced by the eibach anti-roll-kit part. Except for the \"sporty\" and sporty models (the models were equipped with bilstein shock absorbers).

The brake pressure controller dependent on the spring's stroke on the rear axle must be inspected and, if necessary, adjusted in accordance with the workshop manual. The original rear shock absorbers must be replaced by the shock absorbers provided.

Vehicles equipped with combined fog lights and traffic lights must be checked if the height of the lower edge of the fire is less than 350 mm from the ground. In this case, additional traffic lights must be mounted above 350 mm. The original traffic lights must be taken out of service by removing the light bulbs and connecting the cable. Not suitable for the \"cross\" model. Only for vehicles with the following features: front axle: steel spring, rear axle: upgrade control.

Excluded colt rallyart until 2009. Starting from the supplement 14. Please check your niv: this kit fits: 10th character - letter (a, b.

Increased axle load when using the trailer (see approval). If there is an individual national approval, it is necessary to approve an acceptance of the amendment in accordance with the 19/2 stvzo. No type: 1.6 racing (ds3). Please contact us after the purchase. Not for \"caddy maxi.

\" Engines \"lpg system (liquefied petroleum gas)\" included! Only for cars with pasm (electronic shock control). For cars with independent suspension at the rear axle. For cars with dynamic rear axle. Vehicles in the m1g category (offroad) must be reclassified to m1.

For vehicles without amg suspension. For vehicles with amg suspension. The spring plate can be changed!

- the e8530-140 kit may require an oe-spring-plate no. The e8547-140 and e8550-140 kits may require an oe-spring-plate no. For vehicles with edc (electronic shock control). Export only - neither available in Germany - only without a component certificate! Not for \"nurburgring edition\" (211 hp).

Pig's tail on top. For petrol engine with manual gearbox.

For petrol engine with automatic transmission and diesel vehicle. Not for \"abc\" (active body control). Only for vehicles with s-line suspension. Only for vehicles without s-line suspension.

Only for vehicles without sport suspension plus and without drc - dynamic ride control. Only for vehicles with sport suspension more, including drc - dynamic ride control. Not for \"tiguan allspace.\" Only for vehicle with range extender. Items you might be interested in. Pro-kit eibach suspension springs for bmw series 3 limo e46 02.1998-04.2005 970/1100 kg. Protection of original rgm bumper abs black dacia sandero ii also stage of 2012.

Protection of original rgm shock pads abs black ford kuga i suv break 03.2008-02.2013. Original rgm shock protection abs smooth black vw t5 m. Protection of original rgm shock pads abs black vw caddy iv also maxi de bj.

Original rgm loading edge protection abs smooth black vw t6 vi with tailgate 04.2015. Protection of original rgm shock pads abs black vw golf vi convertible from the year of construction 03.2011. Original rgm bumper protection abs black opel mokka x suv from facelift 07.2016. Ean:gtin:4050278104500 English German has. General information 7 9 10 12 15 without full equipment.

16 18 19 20 21 26 32 42 44 56 58 59 60 63 of addendum 14 65 66 for the 5-seater 67 version for the 7-seater version 68 69 71 72 102 159 without edc 162 163 168 170 171 179 181 182 183 184 193 210 211 212 213 spring curled up 219 231 232 234 236 237 239 240 243 244 246 247 248 248 249 a. Commonnotes 7 9 10 12 15 not fully equipped.

16 18 19 20 except vehicles with 4x4. 21 26 32 42 44 56 58 59 60 63 65 66 for 5 places 67 for 7 places 68 69 7 1 72 102 for motorhomes 159 without edc 162 steps for \"caddy maxi\" 163 168 170 171 179 181 182,183 steps for \"sti\" 184 193 203 210 211 long wheelbase 212 213 219 steps for \"trailhawk\" 231 232 234 236 237 239 240 243 244 246 247 248 steps. One / cooper / cooper s.

Achslast in vorne/hinten 890/800 kg. The item \"eibach kit pro springs mini convertible r52 2004-2007 one/cooper/cooper s\" is on sale since Saturday, September 14, 2019. It is in the category \"auto, motorcycle - parts, accessories -auto parts- suspension, steering-springs\". The seller is \"spangenberg-shop\" and is located in wedel, schleswig-holstein. This item can be shipped to the following country: Europe.

reference number oe: a style of vehicle, focus, convertible, performance, kit
product group: suspension
unit: 4 kit
location: rear
manufacturing countries: Germany
ean: 4050278104500
product type: helical springs
manufacturer's coin number: e10-57-001-03-22-b
manufacturer: 2 years
fabricant: eibach
mark: - unmarked/generic -